Specifications: PU Composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered
EasyWeed Heat Transfer Vinyl
EasyWeed is the number one selling Siser brand product and for good reason. It applies at a lower temperature than it’s competitors, the carrier sheet can be peeled cold or hot and the designs you cut do not lift during weeding. It’s also very durable in the wash and it doesn’t require as much pressure when applying it to materials. The pressure sensitive carrier sheet allows you to but your designs on a wide variety of products and it can be done with either an iron or a heat press.
Siser EasyWeed is thinner than most other Heat Transfer Vinyls on the market and you can tack it down in just one second, allowing you to layer multiple colors without losing your design registrations to shrinkage. It can also be cut with laser cutting systems. Customers rave at the ease of use and the durability of EasyWeed, so get started today with a great product and make your decorations stand above the crowd!
EasyWeed™ is CPSIA Certified, so it’s perfect for decorating children’s clothing and accessories.
It applies to 100% Cotton and Polyester materials as well as cotton-poly blends and it will even apply to leather. Recommended care instructions can be found below in the additional information tab, as well as craft and professional cutter settings. Iron on and heat press application instructions are below. Please follow the instructions correctly and do not over or under apply.
EasyWeed is just one of many products that Siser and My Viking Vinyl offer, if you need different styles, please check out Siser Glitter or Siser EasyWeed Stretch or any one of the other great Siser products that we carry.
Blade: Standard, 3
Setting: Heat Transfer Material (smooth)
Gram Force: 8-9
Speed: 30 cm/s
Gram Force: 80-90
Speed: 25-50 cm/s
Scan N Cut:
Cut Speed: 1
Cut Pressure: 1
Application instructions (home iron)
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
- Peel carrier hot or cold
Application Instructions (heat press)
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium pressure for 10-15 seconds
- Peel carrier hot or cold
EasyWeed Applies to:100% cotton
Laundering:Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean